1. No Access to the Keyboard During the Boot Process?
Help, I cannot access my keyboard at boot!
If that is the case, I could advocate:
1-1. If using a USB keyboard, plug the keyboard into the number one USB ports at the laptop’s return (on the motherboard). Restart the computer and strive once more.
1-2. Try some other acknowledged working USB keyboard plugged into the primary USB ports on the computer’s lower back (on the motherboard). Restart the pc and strive once more.
1-3. Try some other recognized running PS/2 keyboard, restart the pc, and attempt once more.
1-4. If using a PS/2 Keyboard, attempt changing your keyboard with a USB keyboard, restart the pc, and attempt again.
1-5. If these steps fail, put off your keyboard connection and shut the computer off with the electricity button. While the laptop is off, plug the keyboard returned into the laptop and start the computer.
Still, does not paintings? Please visit the “I need to flash my bios” segment and continue with flashing your bios.
2. Does Your Computer Freeze at Bios?
Why is my pc frozen?
2-1. Remove all devices out of your pc, including removable hard drives, additional USB gadgets, and printers and faxes. Restart the pc and try once more. If no result, visit steps 2-2.
2-2. If you can see your bios display screen, please faucet the important thing to enter your bios settings. While the interior of bios, ensure that your difficult drive, reminiscence, and video card ( if applicable) are detected. Suppose it isn’t always, attempt re-seating or replacing the unit that isn’t being detected. If no result, visit steps 2-three.
2-3. While looking in bios and all of your hardware is getting detected ok, please reset the bios again to its default settings and choose “store and quit.” The pc will restart, and you ought to be searching at the running system loading page at this factor. If no result, visit steps 2-4.
2-four. However, open the laptop, eliminate all 1 memory module (commonly closest to the CPU) and disconnect all difficult drives. Also, disconnect and PCI or AGP upload on playing cards and start your laptop. If you spot “running device no longer observed” or a similar message, progress has been made. Then start including lower back 1 object at a time, restarting the pc after each object to look whilst it fails.
If these steps nonetheless won’t paintings, please proceed to the “I need to flash my bios” phase.
3. Computer Beeping Noises on Power Up
No facts on screen and laptop yelling at you?
Three-1. If your laptop is beeping at the beginning up and you don’t see whatever is on your display. There is a hardware hassle along with your pc. Please check your motherboard or pc manufacturer’s website for bios code meanings. If this isn’t always possible, the first thing to strive for is to get rid of all reminiscence sticks besides, for one, restart your pc and attempt again. If no result, please go to step three-2.
3-2. If removed and tested all memory, please disconnect all inner connections EXCEPT for Power delivery connections, Video card connections, and the Power transfer (PSW). Also, leaving 1 stick of memory, heatsinks and fans plugged in and restart the pc and try once more. If no result, please go to step three-3.
Three-three. If you have a video card established and feature onboard video as properly, please dispose of the video card and the power connection to that card. Hook the video cable in your onboard video connection. Restart your computer and attempt again. If no result, visit steps three-4.
Three-four. If the beeping nevertheless exists, Try changing the memory with a regarded working module. Restart the computer and try again; if no result, please replace the motherboard and strive once more. If still no result, visit steps 3-5.
Three-five. If beeping nevertheless exists, replace the processor and add the simplest important connections ( Power deliver connections, Video card connections, and the Power transfer (PSW), leaving 1 stick of reminiscence, heatsinks, and fans plugged in as nicely ). Start the computer and attempt again.
Note: If all steps do now not paintings, please evaluation the steps one extra time. If the pc continues to be beeping at the beginning up, please touch a neighborhood computer restore technician
4. Windows Was Unable to Start?
Unmountable quantity, home windows did no longer begin effectively?
4-1. First, you ought to strive to “start Windows normally.” If this does not deliver you lower back into Windows, pass to step 4-2.
4-2. Choose the “Use final known proper configuration,” you ought to be able to boot back into Windows at this point, if now not continue to step four-three.
Four-three. Choose “Repair” as a choice and let the laptop go through motions; your laptop can also restart more than one time inside the process. You must now be able to get back into Windows. If no longer, please continue to step 4-four.
4-4. You will need to boot from a Windows set up DVD or bootable USB with the installation files. Make sure to press the ok key at bios to view/trade boot options. Boot the DVD / USB, choose to restore, after which choose your Windows installation directory. If induced with a command set off, kind “chkdsk /r,” after which press input. If no result, pass to step 4-five.
4-5. If some other computer is to be had, please put off the hard force from the affected laptop, insert the difficult force into the working pc as a slave ( making the proper jumper configuration exchange at the primary and slave power). Then boot into Windows the use of your known working difficult power, then try and recover as an awful lot personal statistics as possible and save it on the known running difficult pressure. If another computer is unavailable or this does not be just right for you, please continue to step 4-6.
4-6. Attach a detachable storage medium ( removable hard power ) Boot to a recovery software application or Live CD using your DVD force or USB drive. A few of those utilities are Hiren’s Boot CD, Ultimate Boot CD, Knoppix, and Ubuntu. Access your difficult power from this utility and back up all of your personal files and records. Then, remove your removable tough pressure, restart your pc, and hit F11 or Ctrl + F11 again and again when you have a manufacturing facility set up windows healing partition. Or when you have a DVD Windows installation disc, insert this disc at the beginning up. Choose the “installation” option and installation over your old damaged Windows installation.
Note: If the above will not paintings, please contact a nearby computer restore technician.
5. I Need to Flash My Bios!
Bios corrupted, appearing peculiar?
5-1. Obtain your bios well-matched files. Most of the time, you can get these documents from the producer’s website. Just look for the documents on their internet site, using your model # of your pc or provider tag.
5-2. Create a boot-capable floppy force along with your bios documents. Then manually copy the bios files onto the floppy power, eject the floppy power, insert it into the stricken pc and begin the computer. Press the specific key to get the right of entry to your boot menu whilst the laptop is starting up; select your floppy drive. If everything goes to devise, you ought to see a command activate. Follow your producer’s commands on the way to flash the bios. If you do not have a floppy drive, proceed to five-three.
5-3. Create a bootable USB with your bios files on it. One application to get this job accomplished could be HP’s USB Storage Format Tool. Then manually replica the bios documents onto the USB power, eject the USB drive, insert it into the pc and begin the computer. Press the particular key to get the right of entry to your boot menu. When the pc is starting, select your USB pressure. If the entirety is going to plot, you must see a command prompt. Follow your manufacturer’s instructions on the way to flash the bios. If you do not have USB power, proceed to five-4.
5-four. Create a boot-in position DVD together with your bios files on it. When making your iso, copy the bios documents into the ISO earlier than compiling. Burn the DVD, eject the DVD, insert it into the afflicted pc and start the pc up. Press the unique key to get the right of entry to your boot menu while the computer is taking off. Choose your DVD pressure. If everything is going to devise, you have to see a command spark off. Follow your manufacturer’s instructions on the way to flash the bios.
